Deskripsi
USAGE INSTRUCTIONS
- Drive the screw into the wood material, perpendicular to its surface.
- Connect the cable of the force transducer to the display unit R320.
- Switch on the unit by pressing the “ON” button for 3 seconds.
- Select the Peak hold function.
- Start the screw withdrawal process by placing the mechanics over the screw. Catch the screw head by the fork of the force transducer.
- Slowly turn the handle clockwise until the screw is removed. The speed of the withdrawal should be approximately 0.5 mm/s.
- Record the maximal force value and press the “Max” button before the next test to reset the display.
PACKAGE CONTENTS
- Screw withdrawal mechanics with force transducer
- Display unit, R320
- Screws and screwdriver
- Rechargeable battery and charger
- Aluminium carrying box
- 10 special screws
- User manual
TECHNICAL SPECIFICATIONS
Force transducer capacity 5 kN (survives 10kN)
Temperature sensitivity less than 0.005%/Ko
Hysteresis error less than 0.05%
Repetition error less than 0.03%
Operating temperature -10 °C to +40 °C
Resistance 350 Ω
Material steel
Manufacturer Kaliber MM Kft., Budapest, Hungary
Force meter resolution 5 N
Display unit operation temperature +10 °C to +40 °C
Battery 4 pieces of AA size 1.5 V battery
Ulasan
Belum ada ulasan.