MED-01 Medical Packaging Tester

Features

Professional

  • Better than 0.5% of full scale effectively ensures accurate test results
  • 16 independent test modes are available, including compression force, tensile strength, and peel strength of medical appliances and foams
  • Professional pressure sensor monitors the internal pressure change during the test of force properties
  • The system supports bidirectional test mode of stretching and compression, and 6 test speed can be freely selected based on user requirements
  • Intelligent designs of over-travel protection, overload protection, and automatic position reset for safe test operation

Intelligent

This instrument utilizes Labthink’s latest embedded computer control system and operating software, with user-friendly operating interface and intelligent data management. It also supports LystemTM Lab Data Sharing System, which ensures uniform management of test results and test reports.

  • Embedded computer control system provides safer and more reliable data management as well as test operation
  • The system can be easily operated by a standard monitor, a mouse and a keyboard; without requiring a PC
  • The system is equipped with four USB ports and dual Internet ports for convenient input, output and data transfer
  • Status monitoring and intelligent reminding of sensor calibration ensure instrument in the best working condition
  • Historical data back up and management functions for diversified data analysis
  • The system uses the high performance processor core and large storage space, which can conduct data comparison and analysis for 50 parallel tests at the same time
  • Multi-level account control for better data management and protection
  • Embedded help document for user viewing at any time
  • Supports LystemTM Lab Data Sharing System for uniform and systematic data management

Principle

The pre-conditioned specimen is mounted between two grips, which move in relative direction during the test. The changes of force and displacement are separately recorded by the load cell fixed on the driven up and embedded displacement transducer. The relative parameters of force properties can be obtained by further calculation.

Standards

This test instrument conforms to the following standards:
ISO 37, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB14232.1-2004, GB15811-2001, GB/T1962.1-2001, GB2637-1995, GB15810-2001, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, QB/T 2358, QB/T 1130, JIS P8113, YY0613-2007, YBB00042002, YBB00112004

Applications

This instrument is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special material tests. Examples of instrument applications:

Basic Applications
  • Tensile Test
  • Puncture Test of Rubber Closures
  • Test of Tensile Strength and Elongation Rate
  • Break Test of Ampoule Bottles
  • Test of Tensile Strength at Break
  • Sliding Resistance Test of Hypodermic Syringe
  • Tear Resistance Test
  • Seal Performance Test of Hypodermic Syringe
  • Heatseal Strength Test
  • Puncture Test of Hypodermic Needle
  • 90 Degree Peel Test
  • 180 Degree Peel Test
  • Fastness Performance Test of Hypodermic Needle and Needle Hub
  • Fastness Performance Test of Hypodermic Needle Cap and Needle Hub
  • Compression Test of Plastic Blood Bags
Extended Applications
(Additional Accessories Required)
  • Seal Performance Test of Hemostix
  • Pullout Force Test of Rubber Closures
  • Opening Force Test of Jelly Cups and Yogurt Cups
  • Unwinding Force Test of Adhesive Tapes
  • Tear Test Using Trouser Method
  • Peel Test of Protection Films
  • Peel Test of Release Paper
  • Opening Resistance Test of Combined Covers
  • 90 Degree Peel Test of Adhesive Tapes
  • Puncture Test of Plastic Films
  • Tensile Stress Test of Ropes at Break
  • 90 Degree Peel Test of Magnetic Cards
  • Pullout Test of Cosmetic Brush Hair
  • Pullout Test of Toothbrush Hair
  • 23 Degree Pullout Test of Bottle Caps
  • Opening Force Test of Oral Liquid Caps
  • Tear Resistance Test of Adhesive Binding Books
  • Peel Test Using Floating Rollers
  • Compression and Deformation Test of Foams

Deskripsi

Technical Specifications

Specifications MED-01 Medical Packaging Tester
Load Cell Capacity 250 N (standard) 50 N, 100 N, 500 N (optional)
750 N, 1000 N (Customization Available)
Accuracy Better than 0.5% FS
Test Speed Forward: 10, 50, 100, 150, 200, 300 mm/min (standard)
Backward: 10, 50, 100, 150, 200, 300 mm/min (standard)
Number of Specimens 1
Specimen Width 30 mm (Standard Grip)
50 mm (Optional Grip)
Clamping Way Manual Specimen Clamp
Stroke 600 mm
Instrument Dimension 365 mm (L) x 585 mm (W) x 960 mm (H)
Power Supply 220VAC 50Hz / 120VAC 60Hz
Net Weight 68 kg

Configurations

Standard Configurations
Instrument, Professional Software, Standard Monitor, Mouse, Keyboard and Universal Grips
Optional Parts
Load Cell, Standard Pressure Roller, Test Plate, Sample Cutter, Floating Roller, Customized Grips, Lystem Lab Data Sharing System, Printer(compatible with PCL3) and Other Test Accessories, e.g. Penetration Test of Rubber Stoppers in Antibiotic Bottles and Hypodermic Needles, Fracture Strength Test of Ampoule Bottles, Leak Test of Plastic Packages under External Pressure, Connection Force Test between Hypodermic Needle and Needle Hub, Connection Force Test between Hypodermic Needle and Needle Cap, Sliding Resistance Test of Pistons, Leak Test of Plastic Packages and Low Speed Unwrapping Device

Ulasan

Belum ada ulasan.

Jadilah yang pertama memberikan ulasan “MED-01 Medical Packaging Tester”

Alamat email Anda tidak akan dipublikasikan. Ruas yang wajib ditandai *