Deskripsi
Product Features
- The GTRs of various films for distinct gases are testable
- Tests 3 equivalent specimens at one operation and exports test results in average value
- Equipped with temperature control device (optional parts) to meet various test conditions
- The instrument comes with two test modes: proportional mode and standard mode
- The system is controlled by computer and test process is automatic
- Reference film for fast calibration to ensure accurate and universal test data
- Equipped with RS232 port for convenient data transfer
- Supports LystemTM Lab Data Sharing System for uniform management of test results and test reports
Principle
The pre-conditioned specimen is mounted in the gas diffusion cell as to form a sealed barrier between two chambers. The lower-pressure chamber is firstly evacuated, followed by the evacuation of the entire cell. A flow of gas is thereafter introduced into the evacuated higher-pressure chamber and a constant pressure difference is generated between two chambers. The gas permeates through the specimen from the higher pressure side into the lower side. The gas permeability and other barrier properties of the specimen can be obtained by monitoring the pressure changes in the lower chamber.
Standards
This test instrument conforms to the following standards:
ISO 15105-1, ISO 2556, GB/T 1038-2000, ASTM D1434, JIS K7126-1, YBB 00082003
Applications
This test instrument is applicable to the determination of gas permeability of:
Basic Applications |
---|
|
|
Extended Applications |
|
|
|
|
|
|
|
|
|
Technical Specifications
Specifications | Film Test |
---|---|
Test Range | 0.1~100,000 cm3/m2·24h·0.1MPa (standard) |
Number of Specimens | 3 |
Vacuum Resolution | 0.1 Pa |
Vacuum Degree of Test Chamber | <20 Pa |
Test Temperature | 15°C~55°C (constant temperature controller is optional) |
Accuracy | ±0.1°C |
Specimen Size | Φ80 mm |
Test Area | 28.27 cm2 |
Test Gas | O2, N2 and CO2 (outside of supply scope) |
Test Pressure | -0.1 MPa ~ +0.1 MPa (standard) |
Gas Supply Pressure | 0.4 MPa ~ 0.6 MPa |
Port Size | Φ6 mm PU Tubing |
Instrument Dimension | 670 mm (L) x 490 mm (W) x 350 mm (H) |
Power Supply | 220VAC 50Hz / 120VAC 60Hz |
Net Weight | 57 kg |
Configurations
- Standard Configurations
- Instrument, Professional Software, Round Sample Cutter, Vacuum Grease, Fast Quantitative Filter Paper and Vacuum Pump
- Optional Parts
- Constant Temperature Control Device, Blades for Sample Cutter, Vacuum Grease and Fast Quantitative Filter Paper
- Note
- 1. The gas supply port of the instrument is Φ6 mm PU tubing;
2. Customers will need to prepare for gas supply.
Ulasan
Belum ada ulasan.